GForce Arms, Inc. Announces “Filthy Pheasant” Over/Under Shotgun

Today, GForce Arms, Inc. is proud to announce the shipping of their “Filthy Pheasant” Over/Under shotgun. This model is the newest in their line of home defense and hunting shotguns, aimed for the average person who loves to hunt or shoot trap. It features a beautiful Turkish walnut stock and forend, high grade aluminum receiver, and an extractor action for ease of unloading and loading. It comes standard with their limited lifetime warranty.

For all questions and inquiries, please contact our team.

GFORCE ARMS, INC.

(833) 3GFORCE (833-343-6723)

info@gforcearms.com

www.gforcearms.com

Embracing Firearms Safety

By Glen Wunderlich

Charter Member Professional Outdoor Media Association (POMA)

Did you ever notice the pilot of any commercial airliner inspecting wing flaps, tires, engines, etc. as part of pre-flight safety checks?  Certainly the pilot understands that other qualified people have already given the airplane a thorough inspection replete with myriad checklists.  Is the pilot’s work then redundant?  Yes!  However, when the pilot’s own life – and that of passengers and crew – depend on a physical assessment, everyone has a vested interest in the process.  When it comes to handling firearms, safety is paramount for the same reason.

Recently, on the movie set “Rust” innocent people were shot because foundational protocol relative to gun safety was ignored.  Let’s put aside any politics and any personal bashing.  Blame will never call back the bullet and the devastation redundancy could have avoided.  Quite obviously, someone put a live round into a real firearm in their world of make-believe.

Had the unsuspecting actor and any handlers of the ill-fated firearm done a “pre-flight” check such as all good pilots perform, the error would have been discovered and tragedy averted.  Believe it or not, I knew what had gone wrong before sifting through the erroneous reports of misfires and prop guns.  A loaded firearm had been pointed at something the operator did not want to shoot and the trigger was pulled.

Over the next month or so, hundreds of thousands of Michiganders will be “piloting” their own deer hunting experiences.  Firearms will be shared with friends for examination of the latest calibers, ammunition and optics.  Although we may have been made aware of the 10 rules of gun safety somewhere along the way, we have to be smarter than that; we must embrace and live safety or risk the possibility of becoming or creating a haunting statistic.

Whenever you handle a firearm or hand one to someone, always open the action immediately, and visually check the chamber, receiver and magazine to be certain they do not contain any ammunition. Always keep actions open when not in use for all to see.

If the person handing the firearm to you has not demonstrated that the firearm is unloaded, do not accept it!

Never assume any gun is unloaded — check for yourself! This is considered a mark of an experienced gun handler!

Never point your gun at anything you do not intend to shoot. This is particularly important when loading or unloading a firearm. In the event of an accidental discharge, no injury can occur as long as the muzzle is pointing in a safe direction.

Safety is everyone’s job.  If you see someone handling a firearm irresponsibly, say so.  Waving any firearm around carelessly – without regard for where the muzzle is pointing 100-percent of the time – is inexcusable and nobody present should remain quiet.

The National Rifle Association (NRA) is recognized nationally as the gold standard for safe firearm training and continues to develop millions of safe, ethical, responsible shooters and instructors.  Although hunting-related accidents continue to decline, it would be wise for those deer hunters among us to reacquaint themselves with the NRA’s 10 rules of firearms safety and to adopt them as policy.  Foolproof firearms have yet to be invented.

Polymer80 AFT Kit Designed for the Home Handgun Builder

DAYTON, NV (Nov. 1, 2021) — If you always wanted to build your own high-quality handgun but were unsure of how to get started, Polymer80 (P80) has a solution: the Polymer80 AFT Kit. Designed with the home builder in mind, AFT stands for Assemble for Thyself. The P80 AFT Kit contains all the necessary components to build a complete, serialized PFS9 or PFC9 pistol quickly and easily.

The new Polymer80 AFT Kit includes everything needed to build a fully operational firearm: a serialized pistol frame, complete pistol frame parts kit, complete slide assembly, Locking Block Rail System™ & Rear Rail Module™, magazine, and a hard-sided black pistol case. The Polymer80 PFS9 and PFC9 pistols are loaded with features from top to bottom for comfort, ease of operation and peak performance. Each pistol offers next generation ergonomics, high-strength reinforcement, polymer construction, Picatinny accessory rail, double undercut trigger guard, extended beavertail, right & left thumb rail, 1911 grip angle, and PTFX™ texture pattern.

The Polymer80 AFT Kit is fully customizable, so you can easily make changes to suit your individual needs. It’s also designed to be very “user friendly,” even for those who are not experienced gun builders. They come pre-drilled, therefore no hand tools are required. For those who prefer to build a complete, serialized firearm, the new Polymer AFT Kit is the one for you.

“The popularity of building your own firearm continues to grow exponentially,” said Loran Kelley, Polymer80’s founder and CEO. “We have had customer requests for a kit that offers a little less work and a serial number. We are happy to comply with our customer requests. The AFT Kit provides them with an easy way to build their own high-quality handgun from the ground up, which meets their requirements and still creates a tremendous sense of pride in their completed firearm. It’s one more example of our company motto, ‘Engage Your Freedom.’” The company offers its customers a wide array of build components, from 80 percent pistol frame kits, AR parts & magazines, pistol barrels, slides, pistol parts kits, pistol magwells, holsters, and more, as well as completed PF-Series handguns. Read more

Hillsdale Welcomes Vets, Community Members to Military Appreciation Day

Halter Center Shooting Sports Education Center will host free open shoot for veterans

Hillsdale, Mich. — Hillsdale College welcomes veterans and community members to an open shoot at the John A. Halter Shooting Sports Education Center on Nov. 6. Veterans will receive free rounds of trap, skeet, 5-stand, Olympic bunker, or sporting clays. All others are welcome to shoot at the regular price. Shotguns, ammo, and expert instruction will be available on site. For more information, contact Rangemaster Bart Spieth at bspieth@hillsdale.edu or call 517-610-5593. All media must RSVP to Emily Stack Davis at PR@hillsdale.edu. Read more

CZ-USA’s New SP-01 Competition Red & Blue Pistols

Kansas City, KS – The new CZ SP-01 Competition Red & Blue Pistols builds on its proven lineage, adding match-ready upgrades and race-gun features competition shooters will be excited about. This new CZ-USA high-performance pistol excels on the range and at home.

The new competition model inherits its build quality from its parent model, the SP-01, so the fit and finish of the steel frame and slide are impeccable. The pistol includes a competition hammer giving it an exceptionally crisp, light trigger pull. Thanks to the lightened hammer spring, the pistol feels lively and remarkably responsive in the hand. Additionally, the SP-01 Competition Red & Blue uses a lighter recoil spring for running target loads.

The new SP-01 Competition Red & Blue pistols feature a 4.6-inch cold hammer-forged barrel for enhanced accuracy and performance. Inside, a steel guide rod adds shot-after-shot reliability and performance. On top of the slide, a fiber optic front sight and serrated rear sight provide precise aiming in a wide variety of lighting conditions. Milled grooves on the forward and rear of the slide enhance the shooter’s grip while racking. Read more

Springfield Armory Announces New XD-S Mod.2 OSP Variants

GENESEO, ILL. – Springfield Armory® is proud to announce the release of two new variants in the XD-S Mod.2® OSP™ line. Combining the concealability and compact size of a single-stack pistol with optics-ready capability, these new .45 ACP and 9mm offerings continue the tradition of the XD-S line by providing the pinnacle of point and shoot ergonomics.

The XD-S Mod.2 OSP 3.3″ .45 ACP delivers heavy-hitting, big-bore power to the compact pistol series, coming standard with a flush-fit, five-round magazine and an extended six-round magazine with grip extension. The XD-S Mod.2 OSP 4″ 9mm offering expands on the 9mm line, giving users a longer 4″ barrel for increased sight radius and improved ballistic performance. The 4” 9mm comes with one seven-round flush-fit magazine and one extended nine-round magazine with grip extension. Both pistols are offered with an optional Crimson Trace micro-sized red dot.

These pistols, like the entire striker-fired XD series, feature passive grip safeties. These add an additional layer of security and safety to these world-class CCW pistols. The result is a safety that is automatically disengaged when you grip the pistol, and re-engages when the pistol is no longer being held.

As part of the Optical Sight Pistol (OSP) configuration, both pistols come with a factory-milled slide for low-profile, direct mounting of compact optics for an intuitive sight picture and uninterrupted focus on target. The result is a handgun that accepts the smallest, most popular micro red dots on the market. Read more

Berger’s Emil Praslick to Host Wind Reading Class at Precision Rifle Expo

Mesa, AZ – Berger’s Mil/LE Business Development Manager and “Wind Wizard”, Emil Praslick, will be hosting a wind reading class during the Precision Rifle Expo, October 30-31st.

Praslick is recognized as one of the foremost authorities on wind reading in the world. The former Head Coach at the United States Army Marksmanship Unit has represented the United States in International long-range shooting for over 20 years and has developed training strategies for both tactical and competitive shooting. Praslick’s wind reading class will help shooters gain insight into understanding the mechanism of wind drift and its influence on bullet trajectory, techniques for recognizing and determining wind speed and direction, and strategies of wind management and target engagement. The daily classes will be held at 10am and 2pm on Saturday, and 10:30am and 1pm on Sunday.

“The Precision Rifle Expo is a fantastic opportunity for both industry folks and the public to meet and learn about what’s new in the precision shooting world. It’s also unique in that the organizers present instructional content for the attendees. I’m really looking forward to teaching and talking to people about the techniques, strategy, and some tips to shooting in the wind. We’re once again partnering with Vortex, who is providing optics for the students so we can really show how to utilize these tools in wind reading,” stated Praslick.

The Precision Rifle Expo gathers the top manufacturers and talent of the long-range precision rifle shooting community, while providing a unique opportunity to see and experience the equipment used by the best shooters in the country. For more information, visit www.precisionrifleexpo.com. Read more

Firearms News Features Story on Firearms Training the Israeli Way

Pennsylvania Training Academy Teaches Shooting and Security Techniques

DENVER – A new story posted on Firearms News today features an interesting and effective way to educate firearms owners on best practices in using their defense tools by learning techniques established by former Israel Defense Forces (IDF) soldiers. Program director Yonatan Stern and other IDF veterans teach the Israeli doctrine of gun fighting, designed to win – as quickly as possible – at the Cherev Gidon Israeli Tactical Training Academy in Wayne County, Pennsylvania.

The Pennsylvania-based Cherev Gidon (translated to: Sword of Gideon) is geographically close to New York, New Jersey and Connecticut and garners interest from law enforcement personnel wanting to improve their skills, but more from average citizens wanting to learn proper techniques of self defense through battle tested training.

“We get a variety of people,” Stern said. “The average person who comes to us is a regular man or woman who is concerned for their safety, probably has guns at home and they want to know how to use those weapons effectively. “ Read more

FN 15 TAC3 AR-Style Rifles

(McLean, VA) FN America, LLC is pleased to announce the release of the all-new FN 15® TAC3 line of carbines. The four configurations offer new colors, finishes, and features. These features include an ambidextrous charging handle and selector and FN’s new custom furniture; developed for improved ergonomics and handling. The new FN 15® TAC3 line of carbines is made to FN’s exacting standards.

“The modern sporting rifle category is the most popular segment of our market. It serves consumers looking for a rifle for shooting sports, hunting, home defense, and general use on the range” said Chris Cole, Vice President of Sales for FN America, LLC. “These customers, whether new to MSRs or experienced, now have access to a professional quality line of rifles with the FN 15 TAC3 and TAC3 Duty. If you’re in the market for an MSR that is easily configurable to your needs, delivers superior accuracy, and is highly reliable, then the FN 15 TAC3 is for you.”

Each FN 15 TAC3 or TAC3 Duty is built from a true MIL-SPEC foundation; high-pressure-tested, magnetic particle-inspected bolt, M16-style bolt carrier group, mid-length gas system, and H-buffer ensuring reliable function with every shot downrange.

Made from FN’s proprietary chrome-moly vanadium steel, the cold-hammer-forged 16-inch government-profile barrel is chrome-lined for extended barrel life. It is fully free floated within an extended handguard, delivering the superior accuracy that FN barrels are known for. Read more

WOOX Introduces the New Cobra Thumbhole Precision Rifle Stock

Hickory, North Carolina – WOOX is excited to announce the newest addition to their lineup of high-performance rifle stocks: the Cobra thumbhole precision rifle stock.

Continuing the success story of their precision rifle stocks and chassis, the new Cobra thumbhole stock is designed for long range precision. Whether at the bench during a competition or out in the field hunting, the WOOX Cobra delivers on its promise of dependable accuracy.

Once again, WOOX has combined “Old World” Italian craftsmanship with innovative American design. The unique ergonomics of the Cobra stock help reduce felt recoil, which help the shooter be more comfortable when they need to squeeze the trigger.

The new WOOX Cobra thumbhole stock is available in both laminated American Walnut and the new “Tiger Wood” designs. Starting at a retail price of just $699.00, the WOOX Cobra stock is designed to fit Remington 700, Savage 110, Tikka T3/T3x, Sauer 100, Howa 1500, Ruger 10/22, and Weatherby Vanguard. Read more

1 264 265 266 267 268 714