Michigan: gypsy moth feeding season nearing its end

Help stressed yard trees now and remove egg masses this fall

Gypsy moth caterpillars have been busy this spring in areas across Michigan. As these now large caterpillars near the pupal or cocoon stage, tree defoliation is at its peak.

In highly infested areas, the caterpillars’ munching is audible, and round pellets of frass, or waste, rain down throughout the day and night. Oaks, aspens, willows and other host trees may be nearly leafless, or defoliated, by their feeding.

The hairy, yellow-faced caterpillars with pairs of red and blue spots down their backs can be found on buildings, vehicles, equipment or anything that’s been outside for a while.

Widespread invasive gypsy moth outbreaks in Michigan became apparent in the mid-1980s. Suppression programs in the 1990s and 2000s introduced predators, parasitoids and a fungal disease called Entomophaga maimaiga to aid the naturally occurring nucleopolyhedrosis virus (NPV) in controlling populations.

NPV and the fungal disease have important benefits – they are specific to gypsy moth populations and do not affect people, pets or beneficial insects like pollinators or insect predators. In addition, they remain in the environment, continuing to help control gypsy moth populations every year. The fungal disease spreads best in moist springs, so this year’s drought conditions may have slowed its activity. Read more

Five Charged in Russian Import Scheme

A federal grand jury in Los Angeles unsealed an indictment Thursday that accuses five defendants of conspiring to unlawfully export defense articles to Russia. Specifically, the defendants allegedly exported thermal imaging riflescopes and night-vision goggles without a license, in violation of the Arms Export Control Act.

According to court documents, Elena Shifrin, 59, of Mundelein, Illinois, and Vladimir Pridacha, 55, of Volo, Illinois, were arrested June 17 for their roles in a nearly four-year scheme in which the defendants purchased dozens of thermal imaging devices, most of which cost between $5,000 and $10,000 and are controlled by the International Traffic in Arms Regulations, from sellers across the United States. The other three defendants named in the indictment are: Boris Polosin, 45, of Russia; Vladimir Gohman, 52, of Israel; and Igor Panchernikov, 39, an Israeli national who, during much of the scheme, resided in Corona, California.

As outlined in the indictment, the defendants allegedly obtained many of the items using aliases, falsely assuring the sellers that they would not export the items from the United States. The thermal imaging devices were then exported to co-conspirators in Russia using aliases and false addresses to conceal their activities.

As alleged, the defendants hid the thermal imaging devices among other non-export-controlled items when exporting them to Russia, and they falsely stated on export declarations that the contents of their exports were non-export-controlled items with values of less than $2,500. In no case did any of the defendants obtain the required export licenses to export defense articles to Russia. Read more

Clover, Clover, Let the Deer Come Over

By Glen Wunderlich

Charter Member Professional Outdoor Media Association (POMA)

Work began on food plot sites as early as the soil conditions allowed this spring – all part of a mission to bolster wildlife nutrition and health for years to come.  Unlike professional farmers that have tractors on tracks or 4-wheel drive models, soil conditions must be dry for my 73 year-old Ford 8n to get to work.  And, this year has been the driest in recent memory and has allowed me to till the plots several times already with a plan to get more clover in the mix.

It’s not that foods such as those in the brassica family do not attract deer, because they do.  However, it seems as though weather conditions on a seasonal basis, determine just how much of a magnet they become.  If harsh weather comes early – especially with plenty of snow – turnips and rape bring in the desperate animals early and often.  And, that’s why it’s a good idea to have a portion of available land planted to the hardy food source – one that is available through the deep snow all the way to springtime.

But, observing whitetail deer activity last season, one thing was made clear:  Clover is king!  Although clover and alfalfa are not entirely accessible in times of icing and heavy snow cover – and, sometimes not at all – early season found the deer grazing religiously like cattle in the legume plots.

Each day afield, I’d watch them enter the field and munch their way through the clover bonanza until sunset before they ever nibbled one leaf of brassica plants.  That’s because until cold weather sets in, turnips are not as tasty as when frost has done its magic to the plants and creates a more delicious and nutritious food source for them.  In the meantime, deer were devoted to the clover plots almost entirely.

Clover is inexpensive, hardy and relatively easy to maintain in a food plot, but it is not maintenance-free and requires mowing and fertilization, once established.  But an overall cost, when compared to annuals, is less.  The beauty of perennials is that they provide nourishment for wildlife year-round, as long as they are not covered in ice or heavy snow.

It’s best to occasionally mow down clover plots to about five inches. This will delay blooming and maturation and reduce weed competition. The best time to mow is when half of the clover begins to bloom and plants are about eight to 12 inches tall. This practice not only controls weeds, but also redirects nutrients and growth into new leaf and stem production. This new growth is both highly nutritious and very palatable for wildlife. As the clover matures and fills the plot with more roots and stems, the weeds have less chance to compete.

If a large number of broadleaf weeds invade the plot, then mow them down before they produce seed heads.  A regular schedule of mowing clover plots will eventually kill annual broadleaf weed species without adding costly chemicals.

Clover will produce its own nitrogen, and therefore, requires less nitrogen-rich fertilizers commonly used for other food plots.  A blend of 6-24-24 fertilizer – 6 percent nitrogen, and 24 percent phosphorus and potassium alike before or with planting and thereafter.

And, if you want to witness a spectacular display of driven behavior in whitetails consider this:  I had a trailcam positioned to watch a tiny clover plot of ¼ acre or less, when a tremendous rain storm replete with lightning bombarded the area.  Immediately following the storm – and I mean within minutes – dozens of deer raced to the tiny paradise from every direction and began gobbling up the ultra-green plants.  Lightning injected its own brand of nitrogen into the plot and somehow the deer were ready to partake in a rare feast.

I couldn’t believe my eyes!  Acres and acres of vegetation all around and all they wanted was my energized clover! It sure made me a believer.

Eastern Arizona Counties Organization Contributes to Combat Wolf Depredation of Livestock

GW: And, Arizona is fostering wolves to grow its population. Genius!

SHOW LOW, Ariz. – The Eastern Arizona Counties Organization (EACO) has made a contribution of $25,000 for 2021 to support the Range Rider Program managed by the Arizona Interagency Field Team (IFT) of the Mexican Wolf Recovery Project.

Last year EACO made a $35,000 contribution toward the Range Rider Program, and depredations dropped 39% compared to the same time period the previous year, even though the Mexican wolf population grew. The end-of-year population count increased 14% from 163 in 2019 to 186 in 2020.

Range riders are people who spend time in areas where wolves and cattle are in proximity and chase wolves from the area. It is a way of proactively deterring conflict between wolves and livestock. The work occurs in much of eastern Arizona and is directed to areas where high levels of depredations are occurring. Read more

ALPS OutdoorZ Browning Envy Blind

NEW HAVEN, Mo. – ALPS OutdoorZ, premiere manufacturer of extreme-duty hunting packs and gear for big-game hunters, introduces the new Browning Envy hunting blind for 2021. The Envy blind was developed to address the needs of ground-based bowhunters or any hunter who counts maneuverability, silence, and maximum concealment as high priorities.

Featuring an 82-inch (6’ 10”) center height and 74-inch shooting width, the Envy allows compound shooters to stand when taking the shot and the tall center height means traditional bowhunters can shoot from a seated position without limb impact.

Incorporated into the Browning Envy blind are silent-operation features such as a Silent-Trac window system that not only permits the windows to be raised or lowered quietly, but also provides near infinite adjustability to meet changing concealment and shooting position needs. Another nod to stealth comes via the QuickConnect silent-entry door system. This system utilizes magnets along the door seam for silent entry and exit, and no-fumble hooks to ensure the door remains closed even in high-wind conditions.­­

A durable 600D polyester fabric comprises the Envy’s wall and window curtain construction while shoot-through mesh is used across the 180-degree window openings. Support comes from strong and flexible fiberglass poles connected to aluminum hubs featuring engineered tips and pins. In addition to the 180-degree window placement, the Envy incorporates two camera window ports for still photography or video applications and a 360-degree ground skirt to deliver maximum concealment, minimize light intrusion, and to help keep scent in. Read more

Real Avid Introduces New MASTER-FIT

Real Avid, the leader in DIY for Guns® does it again! In the continual quest to invent the Best Tools for the Job, they are proud to announce the availability of the Master-Fit AR15 Crowfoot Wrench Sets.

These new armorer’s tools are the most comprehensive all-in-one AR15 Armorer’s Torque Wrench Kits ever assembled. Master-Fit single purpose crowfoot wrenches are made specifically for building and modifying AR15 rifles. Specialized for precise fitment and manipulation of MIL-SPEC and free-float barrel nuts, muzzle devices and castle nuts. The titanium coated stainless steel construction provides tight tolerances for solid, nut-gripping strength and enhanced no-slip tool control. Paired with the heavy-duty Master-Fit Torque Wrench, it takes Gun DIY® building to a new level of Master Grade® quality and precision.

Armorer’s wrenches have been around for a long time. In fact, Real Avid introduced the iconic Armorer’s Master Wrench® back in 2018 and it remains one of the top sellers to Gun DIY builders and armorers alike. Armorer’s wrenches are a great all-in-one multi-use gun building wrench for the home builder, but as with all other multi-use wrenches, they do have limitations. Not very long ago, a builder could swap out barrels and handguards with only a delta ring or 18-post free-float wrench. As the market has exploded and new designs emerged, gun modifications are no longer always that simple, requiring additional specialty tools for building and modification. Master-Fit delivers that capability and is one of the most significant upgrades the AR15 tool market has seen in a very long time. Read more

Biggest Names in Bowhunting Attending 2021 Pope & Young Convention

Pope and Young, America’s leading bowhunting organization is excited to announce that their 32nd Biennial Convention, celebrating 60 years of bowhunting conservation is a GO, and some of the biggest names in bowhunting will be in attendance to help them celebrate in Reno, NV July 14- 17th. With Big names and even bigger changes and announcements in store, this is an event you will not want to miss.

The Pope & Young Convention has always been a place to meet some of bowhunting’s living legends, and this year will be no exception. With speaking engagements from, Michael Waddell, Remi Warren, Allen Bolen, Andrew McKean, and many others, it will be one you do not want to miss. There is still time to add your name to this impressive list of attendees. Read more

Hot, dry weather pushes fire danger into ‘extreme’ territory for parts of Michigan

Michigan’s warm, dry, weather has created a lot of beautiful days for outdoor activity – and a steeply increased risk of fire. That means taking extra care when camping, burning, or using equipment outdoors.

“Although there have been scattered rains, rainfall is below normal and it’s dry out there,” said Paul Rogers, fire prevention specialist with the Michigan Department of Natural Resources. “People cause the vast majority of wildfires, so it’s critical to use common sense and be careful.”

Fire danger is elevated from the southwest corner of the state into the Upper Peninsula. The National Weather Service is issuing red flag warnings for spots around the state where very warm temperatures, low humidity and stronger winds are expected, including the northern Lower Peninsula and the Upper Peninsula. Read more

Wildlife Forever Reminds Anglers to Trash Unused Bait

White Bear Lake, MN- Wildlife Forever’s coalition of partners and bait shops across the Midwest are reminding anglers how to properly handle live bait after a day on the water. Releasing leftover bait into the environment can pose risk of spreading diseases and aquatic invasive species, which can have devastating effects. New custom bait bags and posters with the message “Don’t Let it Loose” are now available for distribution. The bags give instructions about how to properly dispose of the bait in the trash or how to keep it if planning to reuse it on the next trip.

Parasites, bacteria and viruses are of top concern, especially, VHS (viral hermorrhagic septicemia), which is a deadly fish virus first detected in the U.S. in 1988. Another concern is the water used to transport live bait from one waterbody to another. Anglers need to replace the water in their bait buckets with bottle or tap water when changing waterbodies. This is crucial because invasive species like spiny waterfea and zebra mussel larvae are very small and can unknowingly be transported in bait buckets.

Earthworms are no exception. Many earthworms are non-native to the U.S. and are causing serious damage to our woodland habitats. Once invaded, they alter soils and create conditions suitable for invasive plants. Dispose of unused worms in the trash, not on land.

“As an angler, I was frustrated by the lack of communication teaching anglers about the bait issue,” said Dane Huinker, Conservation Program Manager of Wildlife Forever. “By working directly with local governments and bait dealers, we’re directly reaching anglers with conservation best practices, which is the first step in changing behavior,” Dane said. Read more

Knife Rights’ MI Preemption Bill Passes House

Lansing, Michigan: Knife Rights’ Michigan Knife Rights Act, HB 4066, was passed today by the House with a bipartisan vote of 69-41. HB 4066 is Knife Rights’ signature Knife Law preemption bill. The bill will now move to the Senate.

Knife Rights will let you know when it is time to contact your legislators to support HB 4066.

Knife Law Preemption is a Knife Rights criminal justice reform effort that nullifies existing ordinances and prevents new local ordinances more restrictive than state law which only serve to confuse or entrap law-abiding citizens traveling within or through the state. Preemption ensures citizens can expect consistent enforcement of state knife laws everywhere within a state.

Knife Rights authored and passed the nation’s first Knife Law Preemption bill in Arizona in 2010 and has since passed preemption bills in Alaska, Georgia, Kansas, New Hampshire, Oklahoma, Tennessee, Texas, Utah, West Virginia and Wisconsin.

Knife Rights (www.KnifeRights.org) is America’s grassroots knife owners’ organization; Rewriting Knife Law in America™ and forging a Sharper Future for all Americans™. Knife Rights efforts have resulted in 33 bills enacted repealing knife bans in 23 states and over 150 cities and towns since 2010, as well as numerous litigation victories Read more

1 621 622 623 624 625 1,911