Weatherby® Introduces The Vanguard® Wilderness

Paso Robles, Calif.—Weatherby Inc., legendary firearms manufacturer, announces the introduction of the Vanguard® WildernessTM rifle, one of the latest iterations of the Vanguard® series that debuted in the early 1970s. Since that time, Vanguard® rifles have redefined the level of performance that’s attainable from a production rifle —especially budget-friendly models.

The Vanguard® WildernessTM rifle is accompanied with an accuracy guarantee; when using premium ammunition, it will produce a three-shot group measuring 0.99-inch or less at 100 yds. from a cold barrel. Aiding this assurance is a cold-hammer-forged, matte, bead blasted, blued finished barrel. Twenty-four inches in length, the free-floating barrel is fluted to save weight, which helps the WildernessTM rifle tip the scales at just 6.75 pounds. The WildernessTM rifle is also available with a drop-box magazine (DBM) as an option on certain chamberings, and this option will reduce the weight of the rifle to 6.5 pounds. Read more

Firearms

The KILO2000 from SIG SAUER® has set a New Standard in Range Finding

NEWINGTON, N.H. – The recent introduction of the highly innovative SIG SAUER Electro-Optics Division took SHOT Show 2015 by storm. This new line of premium, high performance optics boasts some of the most advanced technology that the industry has ever seen. A member of this all-new SIG SAUER product line that truly has the ability to set the standard for its category is the KILO2000 Rangefinder.

Extreme accuracy was the goal throughout the engineering process of the KILO2000. Updating at 4x per second in HyperScan mode, the KILO2000 rangefinder with patented LightWave™ DSP technology is amazingly fast as well. Couple that with the ability to range reflective targets at 3,400 yards, trees at 1,500 yards, and deer at 1,200 yards for simple, intuitive long distance ranging. Read more

Hunting, Optics

Upper Peninsula firearm deer season opens with improvement over last year

Young hunter on his first deer hunt, Menominee County

Michigan Department of Natural Resources staff said Sunday’s opening day of the firearm deer hunting season was improved in some parts of the Upper Peninsula over last year, based on reports from deer check stations.

Young hunter on his first deer hunt, Menominee CountyAcross the region, temperatures reached the low 50s, with sunny skies, though lingering snow that had fallen earlier in the week remained on the ground in some places.

Last year, much of the northwestern part of the U.P. was buried under 3 to 4 feet of snow by opening day, in the wake of a strong winter storm that began Nov. 10 and continued for three days, followed by lake-effect snow showers.

At the Marquette DNR check station, one deer was checked on opening day last November. This year, the Marquette station checked six deer, closer to the 10-year average of 10 deer brought in on opening day. Read more

Hunting, Wildlife

Meprolight FRBS 2D/4D Night Sights Make A Difference

When your primary optic fails, your best bet is to have back up sights already in place. In combat and defensive shooting situations, you need to be prepared for the worst-case scenario. That’s why having front and rear back up sights on your gun can be critical to survival. The Israeli manufactured Meprolight FRBS 2D/4D (Front and Rear Back up Sights with Tritium) are auxiliary sights you can rely on when other optics go down. Day or night, it doesn’t matter, the FRBS with Tritium will keep you in the fight.

The new Meprolight FRBS sights are designed to fit MIL-STD-1913 Picatinny rails on AR systems, KPOS and other weapons which utilize the Picatinny rails. The self-illuminated tritium back up sights maintain a low profile and are constructed from high-grade polymer and metal. Fixed with a spring-based locking mechanism, the FRBS won’t snap, weaken or break. They can be flipped into position without coming off the gun, allowing you to keep your eyes on the threat and in action under any lighting condition. Read more

Optics

Bill That Eliminates “No-Gun” Victim Zones Scheduled for Ohio House Floor Vote

COLUMBUS, OH – Substitute House Bill 48 sponsored by Ron Maag (R-Lebanon), is scheduled for a vote by the full House on Tuesday, November 17, 2015.

The bill, which passed out of the House State Government Committee back in June by a 9-2 vote, seeks to restore Ohioans’ right to carry in day care facilities (unless they post “no-guns”), private airplanes, school safety zones, and in non-secure areas of police stations and airports.

The substitute bill also contains “opt-in” language which would to allow authorities governing college campuses and certain government buildings the ability to allow concealed carry. Read more

Gun Control, Self Defense

Michigan Encourages Hunters in Affected Areas to Have Deer Checked for CWD

DNR encourages hunters in affected areas to have deer checked for chronic wasting disease

CWD suspect positive deer harvested in Dewitt Township; Eaton County hunters urged to voluntarily check deer and cease baiting and feeding of deer

Michigan hunters are proving valuable allies in the fight against chronic wasting disease, a fatal neurological disease that has been found in free-ranging white-tailed deer in the state.

More than 700 hunters have submitted the head of their deer for CWD testing so far this year. Test results help the Michigan Department of Natural Resources determine the extent of the disease, and hunter harvest also helps prevent the spread of CWD by thinning the population in affected areas. Read more

Hunting

UTG Pro Top Picatinny Rail Mounts for America’s Favorite Firearms

Remington 870, Mossberg 500, Ruger 10/22

Leapers’ has great news in store for fans of the Mossberg 500, Remington 870, and Ruger 10/22. Top Picatinny rail mounts for all three of these iconic platforms are now manufactured in the USA at our UTG PRO facility. Along with UTG PRO’s outstanding quality, all three platforms have been upgraded to reflect the most current enhancements available.

MTU028SG is our 14-slot top Picatinny rail mount for the Remington Model 870 and 1100 Shotguns. The 6.1″ mount, precision machined from aircraft grade aluminum, is extremely lightweight with a low profile integral base and a full length center cut enabling the use of either iron or bead sights. Designed for quick installation on drilled and tapped receivers, it comes complete with all the mounting hardware needed and does not require the need for a gunsmith.

For Mossberg aficionados we have the MTU029SG, designed for use on drilled and tapped model 500 shotguns. The rail’s bottom surface has been contoured to match the shape of the receiver giving it a very integral look. With an overall length of 5.5″ and 13 top Picatinny rail slots, flexible mounting of optics is achieved while keeping weight and bulk to an absolute minimum. Like the MTU028SG, use of either iron or bead sights is left intact. All mounting hardware is included as expected from UTG PRO products.

For those seeking a more user friendly top Picatinny rail mount for the magnificent Ruger 10/22, the MTU030T22 provides 11 top Picatinny slots to mount you favorite dot sight or optic. Easily installs on drilled and tapped 10/22’s, the 4.67″ MTU030T22 is contoured for optimal fit and retains the same features as its two brothers above. Machined from aircraft grade aluminum and cut along the center line for reduced weight and overall bulk. Read more

Firearms
1 … 1,489 1,490 1,491 1,492 1,493 … 2,087