Ruger Announces Safety Bulletin for SR22 Pistols

In rare instances, if the left and right frame inserts of Ruger SR22 pistols are not properly secured together, the firing pin blocker lifter and hammer block can move independently of each other, potentially rendering them ineffective. If this situation occurs, the pistol will intermittently exhibit a “slack” single-action trigger and has the potential to discharge if decocked over a live round. NOTE: A “slack” single-action
trigger occurs if, while operating the pistol in single-action mode with a magazine inserted, the slide forward, and the manual safety disengaged, a trigger pull does not encounter resistance and the hammer does not fall.

Although only a very small number of pistols appear to be affected, Ruger is committed to safety and would like to examine all SR22 pistols that have ever exhibited a slack single-action trigger or discharged upon decocking. If you experienced either condition, please immediately stop using your SR22 and return it to Ruger for this Safety Retrofit. If you have not experienced either condition, your pistol is not subject to this Safety Bulletin unless one or both of these conditions occur in the future. Further details are available at Ruger.com/SR22Retrofit. Read more

ATA Spearheads Letter to Congress Regarding FET Slippage

GW: An interesting angle to tax some outdoor gear…
The Archery Trade Association’s Dan Forster recently authored a letter, with support from 53 other conservation organizations, to the leadership of the Senate Finance Committee and House Ways & Means Committee that encourages them to take corrective action against federal excise tax slippage. FET Slippage is a relatively new issue that affects ATA members and the entire conservation community. In short, millions of federal excise taxes are lost each year through online marketplaces where non-U.S. companies sell products to U.S. consumers.

Because the online process doesn’t recognize internet marketplace facilitators as importers who would otherwise be responsible for paying the federal excise taxes on these transactions, these funds are slipping through the cracks. Unfortunately, that oversight puts American archery manufacturers at an 11% tax disadvantage and hurts state wildlife agencies that rely on FET dollars to conduct necessary habitat restoration, hunter education, wildlife research and other conservation projects. Read more

Arizona Receives Conservation Funding from RMEF, Partners

MISSOULA, Mont. — The Rocky Mountain Elk Foundation and its partners allocated $2,098,338 in grant funding in Arizona for elk habitat stewardship, wildlife management and hunting heritage projects. RMEF directly granted $156,136 that leveraged an additional $1,942,202 in partner dollars.

“One of the major issues in this part of elk country is a lack of life-sustaining water for elk and other wildlife. Some of this grant funding is specifically earmarked to upgrade more than a dozen water sources,” said Blake Henning, RMEF chief conservation officer. “Additional projects of focus include restoring historic grasslands and a study monitoring predator impact on elk.” Read more

BONE-DRI Moisture-Absorbing Gun Cases Introduces Shotgun & Rifle Case

Provo, Utah  BONE-DRI™, inventor of award-winning moisture-absorbing gun cases, is proud to announce the introduction of the Shotgun & Rifle Case. Engineered with advanced materials to wick moisture, the BONE-DRI Shotgun & Rifle Case protects your prized firearms from rust.

“This is hands-down the most innovative solution to keep your firearms safe and dry after they’ve been exposed to moisture of any form,” said Romney Williams, CEO of BONE-DRI. “Whether traveling to or from the range or the next hunt, the moisture-removing Shotgun & Rifle Case makes it easy to safely transport and protect your valuable shotgun or rifle.”

The BONE-DRI Shotgun & Rifle Case is your new go-to case that puts the others to shame. Humidity and moisture can affect the performance of your gun, cause rust, and make cleaning difficult. Unlike any other gun cases, BONE-DRI cases are engineered with Absorbits™ moisture-removal material, which automatically draws moisture from the firearm and can be used an unlimited number of times; simply recharge the material after use by placing it in the sun or drying with a hairdryer on low heat. Constructed with heavy-duty industrial 800D PVC nylon and lockable Mil-Spec zipper sliders, this soft case easily withstands heavy wear and tear and is guaranteed for life. Read more

Court Rules Against New Jersey in 3-D Gun Ban Case

BELLEVUE, WA – The Second Amendment Foundation and Defense Distributed today are celebrating a court victory in a long-running battle to allow online publication of information related to the 3D printing of firearms, thanks to a ruling by the Fifth U.S. Circuit Court of Appeals that returns claims against the New Jersey attorney general (NJAG) to its jurisdiction.

A district court order had wrongly severed the case against the NJAG, from a lawsuit filed by the plaintiffs, and transferring it to a federal court in New Jersey. Today’s ruling in the Fifth Circuit directs the district court in Texas to “request retransfer from its counterpart in New Jersey.”

“It’s a huge victory for us,” said SAF founder and Executive Vice President Alan M. Gottlieb, “because New Jersey wanted to be severed from our legal action in their effort to prevent publication of the information by Defense Distributed, thus violating the company’s and SAF’s First Amendment rights to promote the exercise of Second Amendment rights.”

This effort began when anti-gun-rights attorneys general, led by Washington State Attorney General Bob Ferguson, filed suit in the Western District of Washington to enjoin the State Department from authorizing the release of Defense Distributed’s files on the internet under a settlement from a previous SAF and Defense Distributed lawsuit. That effort was an offshoot of attempts by then-New Jersey AG Gurbir Grewal and several of his peers to prevent the plaintiffs’ distribution of materials related to the 3D printing of firearms. Read more

The Profound Effects of Anti-Gun Rhetoric

By Glen Wunderlich

Charter Member Professional Outdoor Media Association (POMA)

Through the tough times of the pandemic, Americans have begun to reacquaint themselves with a sense of self-reliance some may never have known heretofore.  We’ve seen firsthand the empty store shelves and how common necessities have been hoarded without a clue as to their return to the marketplace.  We are learning to grow our own food, catch our own fish, and to hunt for meat.

This wave of self-sufficiency extends to home protection and self-defense, as well.  One only needs to look to the demonization of law enforcement and the resulting chaos inflicted upon law-abiding citizens, as we watched nightly scenes of our cities burning to understand the rationale for alternatives to self-preservation.  Plus, the anti-gun sentiment and the continuous desire to restrict Second Amendment rights by officials, who’ve sworn to protect those rights is more than hypocritical; they’re threats to freedom and Americans have taken notice.

Since year 2008, the firearms industry has been booming and continues to be a bright spot in our otherwise struggling economy, as evidenced by 5.4 million new gun owners in the country this past year!  Again, that’s new gun owners.  Regardless of economic conditions across the country, the industry has grown and created over 375,000 new, well-paying jobs since the middle of the Great Recession in 2008.   These are good jobs paying an average of $56,900 in wages and benefits.

In the United States, the industry and its employees pay over $7.86 billion in taxes including property, income, and sales-based levies.  A report by the National Shooting Sports Foundation (NSSF) also notes the significant impact the firearm and ammunition industry has on wildlife conservation funding in America through its growing Pittman-Robertson excise tax contributions to the Wildlife Restoration Trust Fund which exceeded $1.1 billion in 2021.  Along with hunting and fishing license sales, it is these funds that support sound wildlife management.

Particular to Michigan’s economic contribution of arms and ammunition for the year 2021 are the following examples.  Direct jobs:  5155; Resulting Wages:  $210,684,600; Direct Output:  $643,807,600.  Although Michigan is not one of the top 10 states in these figures, it rates as the 10th leading state in related growth and economic development and for related jobs it is 9th in the country.

According to the NSSF, not only does the manufacture and sale of firearms and hunting supplies create good jobs in the United States, but the industry also contributes to the economy as a whole. In fact, in 2021 the firearm and ammunition industry was responsible for as much as $70.52 billion in total economic activity in the country.

The broader economic impact flows throughout the economy, generating business for firms seemingly unrelated to firearms.  Americans working in industries as varied as banking, retail, accounting, metal working, and even printing, all depend on the firearm and ammunition industry for their livelihood.

Our freedom, self-reliance and enjoyment of the outdoors all benefit from the industry that our misguided leaders love to hate.

Biden: America’s Fixer in Chief

By Glen Wunderlich

Charter Member Professional Outdoor Media Association (POMA)

So, our Fixer in Chief has decided to fine oil producers that don’t produce oil on federal leased lands.  A person shouldn’t have to think very long to understand the continued and profound effect this will have on us consumers.  If producers’ overall costs increase because of more governmental overreach, we consumers will foot the bill, as always.

Of course, our Fixer in Chief will do the thing he’s excelled at:  Fix the Blame.  Look over here!  Look over there!  Anywhere but the obvious path to fixing the problem.

And, when he talks of regime change, I’ll hold the door for him, too.

Michigan: help create CWD education and outreach plan for Ionia and Montcalm counties

The Michigan Department of Natural Resources, Michigan State University Extension and the National Charrette Institute will host two CWD Community Education and Outreach Planning Days in late April. Participants will work together to create an education and outreach plan.

The CWD planning days are:

  • Saturday, April 23 – Montcalm County: 10 a.m. to 2 p.m. (drop-in open house) at the Montcalm County Fairgrounds, Ash Building West, 8784 Peck Road, Greenville, MI 48838.
  • Thursday, April 28 – Ionia County: 6 to 9 p.m. at the Sidney Township Hall, 3019 S. Grow Road, Sidney, MI 48885.

People are welcome to attend both sessions or drop in for just one session. No RSVP is needed. Refreshments will be provided both days. Read more

Forest Service Issues Guidance to Manage Future E-Bike Use on National Forests and Grasslands

WASHINGTON — The U.S. Department of Agriculture’s Forest Service is announcing that internal guidance on how future e-bike use is managed on national forests and grasslands has been finalized. The updated guidance clarifies existing policy and provides guidelines to local Forest Service employees that may be considering expanding e-bike access at site-specific locations.

The Forest Service currently allows e-bikes on all Forest Service roads that are already open to motorized vehicles, as well on 60,000 miles of motorized trails, which represent 38% of all trails the agency manages. Today’s finalized guidance allows e-bikes to continue to operate on currently-authorized roads and trails, and lays out a process to evaluate future requests for expanded access. The updated guidance also outlines the required environmental analysis and public input required before making future decisions to expand local e-bike access. Read more

Protect Your Optics This Season With the NOMAD Bino Harness

Charleston, SC – NOMAD Outdoor left nothing to chance when considering everything involved to design the best bino harness. Banking on personal experience and using premium materials and components, NOMAD’s designers created their new Bino Harness to give hunters the best in customization and comfortable suspension at an affordable price.

The Bino Harness joins the new Bull Lounger in the NOMAD lineup, just in time for hunters seeking the best turkey hunting gear this spring. Both are crafted based on the needs of turkey hunters and with the experience and knowledge of NOMAD’s hunting-crazy staff. The result is quality gear that will last and help make each turkey hunting experience better. Read more

1 652 653 654 655 656 2,058